Administrator Mode
105
4
To enable the Vital Sign Monitor connection:
1.
Activate Link:
Enable the monitoring through Vital Sign Monitor.
2.
Host Name or IP Address:
Type the host name or IP address of Vital Sign Monitor.
3.
Port Number:
Match the port to
Port 2
on Vital Sign Monitor. Or keep the default
value 5609. For details, see
8.2 Vital Sign Monitor.
4.
User Name:
Type a valid user name to log into Vital Sign Monitor.
5.
Password:
Type a valid password to log into Vital Sign Monitor.
6. Click
Apply
.
The Connection Status should display “Connected” and connected time.
7. To establish the connection to the second Vital Sign Monitor, click the
Connection 2
tab and repeat the above steps for setup.
These options you can also find on this Vital Sign Monitor setting page:
Cease motion detection messages from:
Stops notifying Vital Sign Monitor of
motion-triggered events.
Cease input trigger messages from:
Stops notifying Vital Sign Monitor of input-
triggered events.
Enable schedule mode:
Starts the monitoring through Vital Sign Monitor based on
the schedule you set in the
Select Schedule Time
section. Refer to
4.5 Recording
Schedule
for the same settings.
For related settings to activate the monitoring through Vital Sign Monitor, see
4.1.2 Motion
Detection
,
4.2.1 Input Settings,
and
8.2 Vital Sign Monitor
.
Summary of Contents for FER521
Page 96: ...82 4 1 1 Video Settings Figure 4 2A ...
Page 97: ...Administrator Mode 83 4 Figure 4 2B ...
Page 152: ...138 Figure 4 38 2 ...
