180
7.4.2 Connecting to the IP Camera
Depending on where you save the created E-Map file (DVR, E-Map Server or Control
Center), the steps to open the Remote E-Map window for monitoring may vary slightly. The
following is the connection example when you store the E-Map file on the DVR.
1. To enable the remote access to the DVR, click the
Network
button, select
WebCam
Server
to display the Server Setup dialog box, and click
OK
to start the WebCam server.
2. At the local computer, open the web browser and type the address of the DVR. The
Single View page appears.
3. Select
Emap
. A valid user name and password are required for login. For the first-time
user, you will be directed to the Download page. Install the E-Map program before you
can run it.
4. On the Remote E-Map window, click the
Login
button and select the camera host to
access its videos and I/O devices. A valid user name and password are required to log
in the camera.
For details on the Remote E-Map functions, see “The Remote E-Map Window”,
E-Map
Application, DVR User’s Manual
on the Surveillance System Software DVD.
Summary of Contents for FER521
Page 96: ...82 4 1 1 Video Settings Figure 4 2A ...
Page 97: ...Administrator Mode 83 4 Figure 4 2B ...
Page 152: ...138 Figure 4 38 2 ...
