Introduction
37
1
1.7.4 Connecting PoE Converter and IR LED Ring for GV-FE3403 /
5303
To install a PoE converter, follow the steps below.
Note:
Instead of installing the PoE converter, you can connect the camera to a PoE switch
and the IR LED ring with a power adapter (optional accessory).
Figure 1-39
1. Connect the PoE converter to a PoE switch with a standard network cable. Use the
RJ-45 connector on the left.
Note:
1. Due to limited space inside the PoE converter, use a standard network cable without
the rubber boot.
2. The camera will not work if you connect the wrong devices to the two RJ-45
connectors on the PoE converter.
2. Connect PoE Converter and the camera with the supplied network cable. Use the RJ-45
connector on the right.
Summary of Contents for FER521
Page 96: ...82 4 1 1 Video Settings Figure 4 2A ...
Page 97: ...Administrator Mode 83 4 Figure 4 2B ...
Page 152: ...138 Figure 4 38 2 ...
