May 13, 2013
3
Connecting Two GV-Combo B Cards
You can install two GV-Combo B Cards of the same model for up to 32 channels. Master
Card is the card with 1-16 channels and Slave Card is that with 17-32 channels. Normally,
the card attached to the lower PCI-E slot number will act as Master, and the card attached to
the higher PCI-E slot number will act as Slave.
•
Hardware Watchdog Connection: Connect the supplied Hardware Watchdog Jump Wire
to the Master Card only
(Figure 3).
•
Accessory Card Connections:
GV-NET/IO Card: Connect the card only to the Master Card.
GV-Loop Through Card: Connect the card for each video capture card.
GV-Multi Quad Card: Only connect one card to any of two video capture cards.
Hardware
Watchdog
GV-NET/IO Card
1-16 DVI Video Cable
1-16 DVI Audio Cable
GV-Combo B Card
(Master)
GV-Loop Through Card
/ GV-Multi Quad Card
GV-Combo B Card
(Slave)
17-32 DVI Video Cable
17-32 DVI Audio Cable
Figure 2
