GeoVision GV-ABL Series User Manual Download

Page: 133 / 223

Administrator Mode

119

3.2.4 DDNS

DDNS (Dynamic Domain Name System) provides a convenient way of accessing the camera

when using a dynamic IP. DDNS assigns a domain name to the camera, so that the

Administrator does not need to go through the trouble of checking if the IP address assigned

by DHCP Server or ISP (in xDSL connection) has changed.

Figure 3-8

1. Click

to enable

DDNS Service

2. Select the DDNS service provider you have registered with. If you chose DynDNS, skip to

Step 5

3. Copy the website address

http://ns.gvdip.com/register.aspx

to a browser to access

Geovision DDNS service.

Figure 3-9

Summary of Contents for GV-ABL Series
































































































































































































































Search results

Summary of Contents for GV-ABL Series

Reviews:

Related manuals for GV-ABL Series

Brands by name

Popular brands

GeoVision GV-ABL Series, User Manual

Search results

Summary of Contents for GV-ABL Series

Reviews:

Related manuals for GV-ABL Series

Brands by name

Popular brands