GeoVision GV-ABL Series User Manual Download

Page: 152 / 223

138

3.5 Image

This section introduces the

Image Settings

On-screen Display

and

Privacy Mask

3.5.1 Image

This page allows you to adjust image settings such as brightness, exposure, IR illumination

and white balance.

[Scene]

Figure 3-27

◼

Current

: Indicates the scene that is being used.

◼

Scene Name

: When you select a scene, the corresponding image parameters are

displayed. You can adjust the image settings according to actual needs.

◼

Auto Switching

: Indicates whether to add a scene to the auto-switching list.

◼

Setup

⚫

Click

to set a schedule for illumination.

⚫

Click

to set a scene as the default scene.

◼

Enable Auto Switching

: Allow the camera to switch to the scene automatically when

the condition for switching to a non-default scene is met.

Summary of Contents for GV-ABL Series
































































































































































































































Search results

Summary of Contents for GV-ABL Series

Reviews:

Related manuals for GV-ABL Series

Brands by name

Popular brands

GeoVision GV-ABL Series, User Manual

Search results

Summary of Contents for GV-ABL Series

Reviews:

Related manuals for GV-ABL Series

Brands by name

Popular brands