140
◼
Exposure Mode:
Select the correct exposure mode to achieve the desired exposure
effect. The default setting is Outdoor.
⚫
Low Motion Blur:
Improve image quality by reducing motion blur in low light
conditions.
◼
Shutter(s):
The length of time that allows light to enter into the lens. You can set a
shutter speed when
Exposure Mode
is set to
Manual
(
Custom
).
Note
: If
Slow Shutter
is set to
Off
, the reciprocal of the shutter speed must be greater than
the frame rate.
◼
Gain:
Control image signals so that the camera outputs standard video signals
according to the light condition. You can set this parameter only when
Exposure Mode
is set to
Manual
(
Custom
).
◼
Slow Shutter:
Improve image brightness in low light conditions.
◼
Slowest Shutter:
Set the slowest shutter speed that the camera can use during
exposure.
◼
Compensation:
Adjust the compensation value as required to achieve the desired
effects.
You can set this parameter only when
Exposure Mode
is not set to
Manual
(
Custom
).
◼
Metering Control
: Set the way the camera measures the intensity of light. You can only
set this parameter when
Exposure Mode
is not set to
Manual
(
Custom
).
⚫
Center-Weighted Average Metering:
Measure light mainly in the central part of the
images.
⚫
Evaluative Metering (BLC):
Measure light in the customized area of the images.
⚫
Face Metering
: Measure light where facial recognition is established.
⚫
Spot Metering
: Measure light spot(s) in the specified area of the images.
◼
Day/Night Mode:
Select
Automatic
for automatic switch between day mode and night
mode depending on the amount of light detected. Select
Night
to produce high-quality
black and white images using the existing light. Select
Day
to produce high-quality color
images using the existing light.
◼
Day/Night Sensitivity:
Set the light threshold for switching between day mode and
night mode. The higher the sensitivity, the more easily the camera is to switch from day
mode to night mode and vice versa.
◼
Day/Night Switching(s):
Set the length of time before the camera switches between
day mode and night mode after the conditions for switching are met.
Summary of Contents for GV-ABL Series
Page 14: ......
