Administrator Mode
141
3
◼
WDR:
Enable WDR to distinguish the bright and dark areas in the same image.
◼
WDR Level:
After enabling the WDR function, you can improve the image by adjusting
the WDR level.
◼
Suppress WDR Stripes
: Enable Suppress WDR Stripes to automatically adjust shutter
frequency based on the frequency of light measured.
[Smart Illumination]
Figure 3-30
◼
Smart Illumination:
Select
On
to adjust the IR illumination settings.
◼
Illumination Mode:
For regular models:
Set to
Infrared
by default.
For GV-BLFC5800:
Set to
White Light
by default.
For GV-TBL8804:
Refer to the table below to configure the settings.
Illumination
Mode
Action
Daytime
Nighttime
With AI
functions
disabled
Infrared
Day Mode enabled
Night Mode and IR light enabled.
White Light
Day Mode enabled
Day Mode and White LED light
enabled.
With AI
functions
enabled
Infrared
Day Mode enabled.
White LED light flashes for
10 seconds upon an alarm
trigger.
Night Mode and IR light enabled.
White LED light flashes for 10
seconds upon an alarm trigger.
White Light
Day Mode and White LED light
enabled.
Dual Light
Night Mode and IR light enabled.
Switches to Day Mode and White
LED light flashes for 10 seconds
upon an alarm trigger.
Note
:
1.
AI functions refer to the smart settings, including Cross Line, Intrusion, Object
Removed, Object Left Behind, Defocus, Scene Change, Enter Area, Leave Area, Face,
People Counting, Crowd Density Monitoring, and Human Body Detection. See details
in
3.5.1 Smart Settings
.
2.
White Light refers to Warm Light LED for GV-BLFC5800 / GV-TBL8804.
Summary of Contents for GV-ABL Series
Page 14: ......