GeoVision GV-ABL Series User Manual Download

Page: 168 / 223

154

3.6.1.4 Object Left Behind

With Object Left Behind, an alarm can be generated when an object which remained in the

detection area for the specified period of time, leaves the specified region. Up to 4 detection

areas can be added. Note that it is recommended

NOT

to overlap the detection areas when

adding multiple detection areas. Select the checkbox next to

Object Left Behind

to enable

and click

to configure.

Figure 3-44

1. Once enabled, click

to mark the live view with a detection area. Repeat this step to

add another detection area.

2. Drag the nodes of the detection area to mark the boundary for detection.

3. You can use the following functions to reduce false alarm.

◼

Time Threshold:

The minimum period of time for an object to stay within the

detection area for an alarm to trigger.

◼

Sensitivity:

Move the slider to adjust the detection sensitivity.

4. For

Trigger Actions

and

Plan

, follow

Step 6 ~ 7

at the bottom of

3.5.1.1 Cross Line

Summary of Contents for GV-ABL Series
































































































































































































































Search results

Summary of Contents for GV-ABL Series

Reviews:

Related manuals for GV-ABL Series

Brands by name

Popular brands

GeoVision GV-ABL Series, User Manual

Search results

Summary of Contents for GV-ABL Series

Reviews:

Related manuals for GV-ABL Series

Brands by name

Popular brands