GeoVision GV-ABL Series User Manual Download

Page: 172 / 223

158

Note:

The

Counting

and

Counting Direction

features are currently nonfunctional.

For GV-BLFC5800, GV-EBD4813 / 8800 / 8813, GV-PTZ5810-IR, GV-TBL4810 / 8804 /

8810, GV-TDR4803, and GV-TVD4810 / 8810

Figure 3-48

1. Once enabled, define the detection area, either by selecting Specified Area and drawing

a desired area on the image, or select Full Screen to set the entire image as detection

area.

2. Configure the following functions as needed:

[Face Detection]

◼

Snapshot Sensitivity

: Drag the slider to adjust the detection sensitivity.

◼

Snapshot Mode

: Select

Intelligent Recognition

for the camera to detect and take

snapshots of the object automatically.

◼

Min. Pupillary Distance (px)

: Click Draw and draw in the live view window.

◼

Counting:

To count the number of people entering / exiting in the detection area,

enable this function. To display the counting results in the live view window, select

People Counting

in OSD settings. Refer to

3.5.2 OSD

for details.

Summary of Contents for GV-ABL Series
































































































































































































































Search results

Summary of Contents for GV-ABL Series

Reviews:

Related manuals for GV-ABL Series

Brands by name

Popular brands

GeoVision GV-ABL Series, User Manual

Search results

Summary of Contents for GV-ABL Series

Reviews:

Related manuals for GV-ABL Series

Brands by name

Popular brands