Administrator Mode
177
3
3.8.2 FTP
After the configuration of FTP, you will be able to upload snapshots from the camera to the
specified FTP server.
General
Figure 3-65
1. Type the
Server IP
address.
2. Change the
Port No.
of the FTP server if needed.
3. Type the
Username
and
Password
of the upload account.
4. Enable
Upload Images
.
5. Select
Overwrite Storage
to overwrite the oldest images when the storage is full. You
can set the maximum number of images allowed in
Overwrite At (Image)
. When the
defined image threshold is reached, the oldest image is overwritten.
6.
Save To Root Directory
: Select a directory in which to save the images, or select
Custom
to name a storage folder on the FTP server.
7. Under
File Name
, select a
Separator
and a combination of
Naming Element(s)
to name
the snapshots captured. A template of the file name is shown.
8. Click
Save.
Note
:
1. To upload snapshots, make sure to enable the
Snapshot
function. For more detailed
instructions, refer to
3.3.2 Snapshot
.
2. If
Overwrite Storage
is not selected and the storage is full, snapshots can no longer be
taken.
Summary of Contents for GV-ABL Series
Page 14: ......
