Appendix
207
To install
GV-ABL / TBL Series, GV-ADR2702 / 4702, GV-AVD / TVD Series, GV-
BLFC5800, GV-EBD Series, GV-PTZ5810-IR, GV-TDR Series, GV-TFD4700, or
directly on
GV-Mount300-2 / 310-2, follow the instructions below.
1.
Assemble the GV-Mount300-2 / 310-2, by attaching the two mounting plates onto the
mounting bracket with the supplied carriage
bolts, 1/4” plain washers, and 1/4” flange
nuts.
2.
Thread the camera wires through the hole in the center of the mounting bracket.
3.
Position the base of your camera according to the enclosed
Screw Position Chart
.
4.
Attach the camera onto the mounting bracket.
A. For
GV-EBD2702 / 2704 / 4700 / 4701 / 4704 / 8700 / 8800
Remove the camera housing and attach the camera base to the mounting bracket
with the supplied M3 screws, washers, and flange nuts. See similar installation in
Step 3 ~ 6
, 1.1.4.1 GV-EBD2702 / 2704 / 4700 / 4701 / 4704 / 8700 / 8800 Standard
Installation
.
B. For
GV-EBD4711 / 4712 / 4813 / 8711 / 8813 & GV-PTZ5810-IR
Remove the camera housing and attach the camera base to the mounting bracket
with the supplied M3 screws, washers, and flange nuts. See similar installation in
Step 3 ~ 6
, 1.1.4.2 GV-EBD4711 / 4712 / 4813 / 8711 / 8813 Standard Installation
.
C. For
GV-ABL / TBL Series & GV-BLFC5800
(Not applicable to
GV-TBL2705 / 4705
/ 8804
)
Attach the camera to the mounting bracket with the supplied M4 screws, washers,
and flange nuts.
D. For
GV-ADR2702 / 4702 / GV-TDR Series / GV-TFD4700
Attach the camera to the mounting bracket with the supplied M3 screws, washers,
and flange nuts. Close and secure the camera housing.
E. For
GV-AVD / TVD Series
Remove the camera housing and attach the camera base to the mounting bracket
with the supplied M4 screws, washers, and flange nuts. See similar installation in
Step 3 ~ 4
, 1.4.4 Installation
.
5.
Secure the assembled GV-IP Camera and GV-Mount300-2 / 310-2 to the wall with the 4
self-prepared screws with the arrow pointing up.
Summary of Contents for GV-ABL Series
Page 14: ......