Administrator Mode
3
3.3.5 Media Stream
Media Stream
By configuring media stream, you can set the camera to transmit code streams by UDP or
TCP protocol to a specified IP address and port number. The settings can be saved and take
effect after the camera is rebooted.
Figure 3-17
1. Click and select a stream from the
Stream Profile
drop-down list.
2. Type
the
IP Address
and
Port
number of the unicast or multicast group for the decoding
device that receives video streams from the camera.
3. Select
a
Protocol
type for the media stream.
4. If you want the device to automatically establish the media stream that has been
previously configured after the restart,
Enable
Persistent
.
5. To delete a stream, click
.
6. Click
OK
to complete the settings.
93
