Compensation:
Adjust the compensation value as required to achieve the desired
effects.
You can set this parameter only when
Exposure Mode
is not set to
Manual
(
Custom
).
Metering Control
: Set the way the camera measures the intensity of light. You can only
set this parameter when
Exposure Mode
is not set to
Manual
(
Custom
).
Center-Weighted Average Metering:
Measure light mainly in the central part of the
images.
Evaluative Metering:
Measure light in the customized area of the images.
Face Metering
: Measure light where facial recognition is established.
Spot Metering
: Measure light spot(s) in the specified area of the images.
Day/Night Mode:
Select
Automatic
for automatic switch between day mode and night
mode depending on the amount of light detected. Select
Night
to produce high-quality
black and white images using the existing light. Select
Day
to produce high-quality color
images using the existing light.
Day/Night Sensitivity:
Set the light threshold for switching between day mode and
night mode. A higher sensitivity means that the camera is more sensitive to the change
of light and becomes more easily to switch between day mode and night mode.
Day/Night Switching(s):
Set the length of time before the camera switches between
day mode and night mode after the conditions for switching are met.
WDR:
Enable WDR to distinguish the bright and dark areas in the same image.
WDR Level:
After enabling the WDR function, you can improve the image by adjusting
the WDR level.
Suppress WDR Stripes
: Enable Suppress WDR Stripes to automatically adjust shutter
frequency based on the frequency of light measured.
98
