Brightness:
Adjusts the brightness of the image.
Contrast:
Adjusts the relative differences between one pixel and the next.
e image.
closest to the image
rescent
, and
nually.
quency of your camera’s imager
g. You can also select 50
may appear in your
d.
indow.
ights enters the
Under low light
a faster shutter speed will lower color quality and image clarity. A slow
age, but moving
elect
Auto
for
r automatic
atic switch between
Black and
night mode. Select
Color
to switch the camera to day
e and night mode.
switch between day
iggered. For
age noise especially under low-light conditions. The higher the
denoise value, the stronger the effect.
Wide Dynamic Range:
adjusts and generates clear live view when the scene contains
very bright and very dark areas at the same time. Select
Auto (Strong)
to bring out
details in the darks areas of the scene, select
Auto (Weak)
to bring out less detail in the
dark area and at the same time keep the bright areas from overexposure, or select
Auto
(Normal)
for a balanced effect. Select
Close
to disable the function. This function is not
available for GV-FER12203.
Saturation:
Adjusts the saturation of th
Sharpness:
Adjusts the sharpness of the image.
Gamma:
Adjusts the relative proportions of bright and dark areas.
White balance:
The camera automatically adjusts the color to be
you are viewing. You can choose one of the three presets:
Indoor, Fluo
Outdoor
. You can also choose
Manual
to adjust the white balance ma
Flicker less:
The camera automatically matches the fre
to the frequency of indoor light sources, e.g. fluorescent lightin
Hz or 60 Hz manually. If these don’t match, faint light and dark bars
images. Check the power utility to determine which frequency is use
Image Orientation:
Changes the image orientation on the Live View w
Slowest Shutter Speed:
Shutter speed controls the amount of the l
image sensor and directly impacts the quality of image presentation.
conditions,
shutter speed allows more light to enter and creates a brighter overall im
objects may appear blurry. You can manually select a shutter speed, s
automatic shutter speed, or select
Auto (Higher Shutter Speed)
for faste
shutter control.
D/N:
Sets the Day/Night mode of the camera. Select
Auto
for autom
day mode and night mode depending on the amount of light detected. Select
white
to switch the camera to
mode. Sets the light sensor’s sensitivity of switching between day mod
The value 10 is the most light-sensitive. Select
Trigger by Input
to
mode and night mode once the input device (e.g. sensor or button) is tr
details, see
D/N
,
Special View Settings
,
4.1.1 Video Settings
.
Denoise:
Reduces im
80
Summary of Contents for GV-FE3402
