20
2.1.2 Assigning an IP Address
By default, GV-FE110 / FE111 is set to a static IP address. Follow the steps below to assign a
new IP address.
Note:
1. The camera has a default IP address of
192.168.0.10
. The computer used to set the
IP address must be under the same network assigned to the unit.
2. If your router supports the DHCP server, the camera will obtain a dynamic IP
address from the DHCP server each time it connects to the LAN, instead of using
192.168.0.10. The default setting for automatic IP assignment is available in
firmware V1.07 or later for GV-FE2301 / FE420 / FE421 / FE4301 / FE520 / FE521
and GV-FER521.
1. Open your web browser, and type the default IP address
http://192.168.0.10
2. In both Login and Password fields, type the default value
admin
. Click
Apply
.
3. In the left menu, select
Network
and then
LAN
to begin the network settings.
Figure 2-4
4. Select
Static IP address
. Type IP Address, Subnet Mask, Router/Gateway, Primary DNS
and Secondary DNS
in the
Configure connection parameters
section.
5. Click
Apply
. The camera is now accessible by entering the assigned IP address on the
web browser.
