Administrator Mode
57
4
4.1.5 Tampering Alarm
The Tampering Alarm is used to detect when the camera is being physically tampered with.
An alarm can be generated when the camera is moved, covered up, or out of focus. The
alarm methods include triggering the output device and e-mail alert. To enable the tampering
alarm, first set up these alarm methods properly:
•
To trigger the output device when a tampering event occurs, enable the output setting
and select
Tampering Alarm
. See
Output Setting
in
4.2.2 Output Settings
.
•
To trigger the e-mail alert when a tampering event occurs, enable the e-mail setting and
select
Tampering Alarm
. See
4.3.1 E-Mail.
Figure 4-7
