Administrator Mode
23
4
4.1.2 Motion Detection
Motion detection is used to generate an alarm whenever movement occurs in the video
image. You can configure up to 8 areas with different sensitivity values for motion
detection.
Figure 4-3
1. The default sensitivity value is 2 for the whole area. To define a different sensitivity
value, click
Reset
.
2. Select the desired sensitivity by moving the slide bar. There are three values. The
higher the value, the more sensitive the camera is to motion.
3. Drag an area on the image. Click
Add
when you are prompted to confirm the setting.
4. To create several areas with different sensitivity values, repeat Steps 2 and 3.
5. Click
Save
to save the above settings.
6. If you want to trigger the alarm output when motion is detected, select
Output 1
and
click the
Apply
button. To activate the output settings, you must also start
Camera
monitoring manually or by schedule. For related settings, see
4.4 Monitoring
.
