Administrator Mode
27
4
4.2.2 Output Settings
There are six output signals are available: N/O (Open Circuit), N/C (Grounded Circuit),
N/O Toggle, N/C Toggle, N/O Pulse and N/C Pulse. Choose the one that mostly suits the
device you are using. Set the pulse duration for the pulse mode.
Figure 4-8
4.3 Events and Alerts
For the events of motion detection or I/O trigger, the Administrator can set up the two
trigger actions:
1. Send a captured still image by E-mail or FTP.
2. Notify Center Monitoring Station, Center V2 or VSM, by video or text alerts.
To have above trigger actions, you must set the following functions in advance:
•
Motion Detection (See
4.1.2 Motion Detection
)---Optional
•
Input Setting (See
4.2.1 Input Setting
)
•
For e-mail and FTP alerts, it is required to start monitoring (See
4.4 Monitoring
).
