32
To enable the VSM connection:
1.
Activate Link:
Enable the VSM monitoring.
2.
Host Name or IP Address:
Type the host name or IP address of VSM.
3.
Port Number:
Match the port to the Video Server port on VSM. Or keep the default
value 5609.
4.
User Name:
Type a valid user name to log into VSM.
5.
Password:
Type a valid password to log into VSM.
6. Click
Apply.
The Connection Status should display “Connected” and connected time.
These options you can also find on this VSM setting page:
Cease motion detection messages from:
When this option is enabled, the camera
will not notify VSM of motion-triggered events.
Cease input trigger messages from:
When this option is enabled, the camera will
not notify VSM of input-triggered events.
Enable schedule mode:
Starts the VSM monitoring based on the schedule you set in
the
Select Schedule Time
section. Refer to
4.5 Schedule
for the same settings.
For the related settings to activate VSM monitoring, see
4.1.2 Motion Detection
and
4.2.1
Input Settings,
and
7.2 VSM
.
