Administrator Mode
4
4.3.10 Registry Database
Note this function is only available for
GV-LPR1200
.
You can automatically activate an output, for example, opening a gate when a captured
license plate matches a number from the database based on the selected matching criterion.
This vehicle database is transmitted from GV-ASManager and saved on the memory card. To
set up the connection with the GV-ASManager for database download, see
GV-ASManager
Connection
, Chapter 9.
Figure 4-26
To use this function:
Make sure a memory card is inserted to the camera and the storage settings are
configured. For detail, see
4.7.2 Storage Settings
.
Make sure the camera is connected with GV-ASManager to download the vehicle
database, or the inserted memory card already contained the vehicle database.
Make sure the output settings of the gate or barrier are configured and enabled. The
gate or barrier must be connected to
output 1
of GV-LPR1200. For detail, see
4.2.2
Output Settings
.
Note:
This function is only supported for GV-ASManager V4.3 or later.
123
