1.1.7 Replacing the Silica Gel Bag
Once the cover of GV-IP LPR Camera 5R is opened, you must replace the original silica gel
bag with a new one.
1. Loosen the camera’s cover.
Camera
’
s Cover
Figure 1-10
2. Remove the silica gel bag.
Silica Gel Bag
Figure 1-11
3. Insert a new silica gel bag to the camera module and fasten the camera’s cover within 2
minutes of opening the silica gel bag package.
IMPORTANT:
The silica gel loses its effectiveness when the dry ca mera is op ened. To
prevent the lens from fogging up, re place the silica gel bag every time when you o pen the
camera and conceal the gel bag in the camera within two minutes of exposing to the open air.
10
