Administrator Mode
4
[Host Settings]
Enter a descriptive name for the camera.
[Auto Reboot Setup]
Select
Enable
to activate automatic reboot and specify the time for
reboot in the sub fields below.
Day Interval:
Type the day interval between the reboots.
Reboot Time:
Use the drop-down list to specify the time for automatic reboot.
[Firmware Update]
This field displays the firmware version of the camera.
[System Settings]
Click the
Load Default
button to restore the factory default settings.
Note:
After applying the default function, the default network connection will be DHCP or
fixed IP (
192.168.0.10
) if the router does not support DHCP. Re-configure your network
settings if necessary.
[Internal Temperature]
This field displays the current chipset temperature inside the camera.
[Reboot]
Click the
Reboot
button to reset the software configuration of the camera.
93