DVR Configurations
6
6.1 Setting Up IP Cameras on GV-System
Follow the steps below to manually connect your GV-Hybrid LPR Camera 20R / 10R / GV-IP
LPR Camera 5R / GV-LPC1100 to GV-System.
Note:
The following instructions are based on V8.5.7.0 software and user interfaces.
1. On the GV-System’s main screen, click the
Configure
button, select
System Configure
,
select
Camera Install
and click
IP Camera Install
. This dialog box appears.
Figure 6-1
•
To automatically set up an IP camera, click
Scan Camera
to detect any IP cameras
on the same LAN.
•
To manually set up an IP camera, click
Add Camera
.
•
To import IP cameras from the GV-IP Device Utility, click
Import Camera
.
•
To map IP devices through the GV
-
IP Device Utility program, click
IP Device Utility
.
•
To add all IP cameras within the IP address range, click
Automatic Setup
.
2. Click
Add Camera
. This dialog box appears.
Figure 6-2
107