10
1.1.6 Connecting the Camera
Follow the steps below to connect your GV-Hybrid LPR Camera 20R / 10R.
1.1.6.1 GV-Hybrid LPR Camera 20R
1. Optionally connect a speaker to the green RCA wire and an external microphone to the
pink RCA wire.
2. Optionally connect a monitor to the black BNC wire. Enable the TV-Out function by
selecting the correct signal format at the TV Out field on the Web interface. See
4.1.1
Video Settings
.
3. Connect the camera’s cable to the GV-PA481 PoE adapter as illustrated below. The
power and network will be supplied simultaneously.
4. Connect the external IR Illuminator’s cable to the power source.
Figure 1-10
5. When the status LED of the camera is on, you are ready to access the live view, adjust the
image clarity and configure the basics.
See Getting Started
, Chapter 2.
CAUTION:
The surface of the external IR Illuminator is at the high temperature of up to
50°C (122°F) during operation of the GV-Hybrid LPR Camera 20R.