[UPnP Settings]
UPnP (Universal Plug & Play) is a networking architecture that provides compatibility among
networking equipment, software and peripherals of the 400+ vendors that are part of the
Universal Plug and Play Forum. It means that they are listed in the network devices table for
the operating system (such as Windows XP) supported by this function. Enabling this function,
you can connect to the GV-Hybrid LPR Camera 20R
/
10R / GV-IP LPR Camera 5R /
GV-LPC1100 directly by clicking on the camera listed in the network devices table. This
function is enabled by default.
[QoS Settings]
The Quality of Service (QoS) is a bandwidth control mechanism that guarantees
delay-sensitive data flows such as voice and video streams, obtain a certain amount of
bandwidth to keep the streaming smooth.
To apply QoS to GV-Hybrid LPR Camera 20R
/
10R / GV-IP LPR Camera 5R / GV-LPC1100,
all network routers must support QoS and QoS must be enabled on these devices. To enable
the QoS on the camera, enter a Differentiated Services Code Point (DSCP) value. This value
is a field in an IP packet that enables different levels of services for the network traffic. When
the video stream from GV-Hybrid LPR Camera 20R
/
10R
/
GV-IP LPR Camera 5R /
GV-LPC1100 reaches a router, the DSCP value will tell the router what service level should
be applied, e.g. the bandwidth amount. This value ranges from 0 to 63 in decimal format. The
default value is 0 which means QoS is disabled. Click
Apply
to finish.
[Network Connection Check Settings]
When the network connection check is enabled, the GV-Hybrid LPR Camera 20R
/
10R /
GV-IP LPR Camera 5R / GV-LPC1100 will check for Internet connection and reboots
automatically when it is disconnected from the Internet. This function is enabled by default.
84
