B. Drill 3 holes for screws. The recommended ones are indicated as
‘1’.
C. Insert the screw anchors to the 3 holes.
D. Depending on how you want to run the wires (see step 7). Drill the
right hole (on the installation sticker) for position A and the left for
position B or both if required.
E. Secure the back plate to the ceiling with long screws.
A. Secure the safety lock to the camera using a short screw.
Use flat screw for number 1 and short screw for number 2.
B. Thread all the wires into the ceiling and connect them.
C. Secure the camera using the torx wrench.
1
2
Secure the camera to the ceiling
9
