10
/
21
Bind ELRS:
GEPRC’s ELRS 868MHz, ELRS 915MHz and ELRS 2.4G receivers have the same operation
method for frequency alignment.
1.When the receiver is powered on and off three times continuously (1 second interval), the
blue light of the receiver indicator will double flash continuously, indicating that the receiver
has entered the frequency pairing status.
2. For X9D/X9D Plus/X9E and Taranis QX7 remote control, turn on the power of the remote
control, press and hold the MENU key to enter TOOLS -ELRS and select Bind to enter the
frequency pairing status.
3.Wait for the blue light of the receiver indicator to change from continuous double flash to
constant light, that is, the frequency pairing is successful. Turn off the receiver power, then
turn on the receiver power, the blue light is always on, which means the receiver and remote
control are connected normally.
①
②
Bind Button
Binding
Binding Successful
