CineStyle 4K Manuals
CineStyle 4K
- 11 -
Bind order
：
Press F/S button(The Receiver) —— Put through power supply —— The light of the receiver green, red light
flash——Press ENTER at Frsky X9D “Bind”—— Unplug the power and rewire (he light of the receiver green, red
light flash, That’s ok)
。
5
、
Set the Radio
-
You need to set the radio so that you can control the Drone.
-
This is use MODE2
Create a new MODE2 model
Then open the necessary channels to the remote control (please see picture below)
Channel
Function
operation
Channel 5(2 switch)
Unlock
0 unlock , 1 lock
Channel 6(3 switch)
Control Drone posture
0 Rate , 1 Angle , 2 Horizon
Channel 7(2 switch)
Control Buzzer
0 Buzzer on
，
1 Buzzer off
Set up as picture below:
