Mark2 Manuals
Mark2
- 4 -
Summary:
Mark 2 is one of the most popular freestyle drone in the world. It’s design is following freestyle
flying expert Johnny and Mr Steele experience.No matter from the chassis down to the position of
lens, antenna. It could be the best choice for freestyle manuver.We specially added red and silver
colour for your choice. Moreover, many 3D printing parts are specially designed for antenna for
both 2.4G and 5.8G and fitting of rear LED assembly. Colourful LED give you a cool feeling at night
flying.
Mark2
（
BNF/PNP
）
Include Mark 2 Frame,SPAN F4 40ATower(F405 flight controller, ESC BLHeli_s 40A,
VTX 5.8Ghz 0/25/200/600mW),Pagoda2 RHCP antenna, RunCam Swift2 2.1mm camera,Equipped
with multiple 3D printing accessories.The overall performance is assembled and debugged by the
GEPRC team, which can fly as long as it is on the frequency.
We are offer two version PNP(without receiver) and BNF(with Frsky receiver).
Specifications:
Brand Name: GEPRC
Model: Mark2
Wheelbase: 230mm
Firmware: betaflight_3.2.5_OMNIBUSF4SD
Input Voltage: support 2-5S Lipo
Motor:GR2207 2400kv
Propeller:GEP5040*3 (10 pairs)
Weight: 330 grams without battery or props
Receiver: Frsky R-XSR (ONLY BNF INCLUDE)
Frame: GEPRC GEP-Mark2
Carbon:Full 3K carbon fiber Twill
CNC:High precision CNC 7075
Wheelbase: 230mm
Thickness of bottom plate: 2mm
Thickness of top plate: 2mm
Thickness of lens plate
：
2mm
Thickness of arms plate:4mm
Flight Controller: SPAN F4 Tower AIO
MCU: STM32F405
MPU: MPU6000
ESC: 40A * 4 BLHeli_s (Dshot 150/300/600) support 2~5S LiPo
VTX:5.8GHz (48 Channel) (OFF/25/200/600mW)
