EGE-MSI-848
8 x 8 M o d u l a r i z e d E n c l o s u r e
( 4 8 2 m m × 3 8 0 m m × 1 0 0 m m )
8
COMMAND
DESCRIPTION
ACTIVE
Report active I/O channels
INDETECT
Input channels detection indicator
OUTDETECT
Output channels detection indicator
PORTSTATUS
Report all output connection status
HDCPON x
Set input port (x=1~8) HDCP to 'on'
HDCPOFF x
Set input port (x=1~8) HDCP to 'off'
HDCPONALL
Set all input port's HDCP to 'on'
HDCPOFFALL
Set all Input port's HDCP to 'off'
HDCPSTATUS
Show the HDCP status of all outputs
(0=disabled, 1=enable)
MUTEO x
Mute video for output (x=1~8)
UNMUTEO x
Unmute video for output (x=1~8)
MUTEI x
Mute video for input (x=1~8)
UNMUTEI x
Unmute video for input (x=1~8)
MUTEALL
Mute all outputs
UNMUTEALL
Unmute all outputs
MUTESTATUS
Show the mute status of all outputs (0=unmuted,
1=muted)
HPDL x
Pull the input (x=1~8) hot-plug-detect signal to
'low'.
HPDH x
Pull the input (x=1~8) hot-plug-detect signal to
'high'
HPDLALL
Set the hot-plug-detect of all inputs to 'low'
HPDHALL
Set the hot-plug-detect of all inputs to 'high'
HPDSTATUS
Report the hot-plug-detect signal status of all
inputs
EDIDMODE x y
Set the EDID mode of input (x=1~8) to y (1~3)
EDIDMODEALL x
Set the EDID mode of all input to x (1~3)
EDIDPORT x y
Set the EDID mode of assigned port (y=1~8) to
input (x=1~8)
EDIDPORTALL x
The EDID mode of all ports is assigned to
output (x=1~8)
EDIDSTATUS
Report the status of the EDID modes of all
inputs