Instructions for Use
CPET
Version: 4 | Release date: 01 April 2022
page 19
1.
Select CPET.
For this:
Select the "CPET" [1]
button on the left.
After starting the
measurement, the
zero point is
determined. For this,
the connection to the
sensor is
automatically
disconnected via
valves so that the
patient can already
breathe at the
sensor.
Afterwards, the
breathing signals are
automatically
synchronised.
If a flow / volume curve has not yet been recorded before the
examination, it can be recorded during preparation.
1