Instructions for Use
CPET
page 86
Version: 4 | Release date: 01 April 2022
Setting
Function
No filtering
No filtering, the raw data is displayed.
Combined Filter The data is sorted and then the mean value is calculated
from the middle range.
Moving average The data is continuously summed up and divided by the
number of data.
Moving median The data is sorted and only the middle value is used.
After selecting the pull-down menu in the line "Representation
mode" the following selection can be made:
Setting
Function
All data
All measured data is displayed.
Fixed time
intervals
The measured values are displayed averaged according
to the time interval specified in the Interval line.
Average of load
stage
All measured values of a level are averaged and
displayed in one value.
Begin of load
stage
All measured values of a load level are displayed
averaged according to the time interval defined in the
Interval line at the beginning of the level.
End of load
stage
All measured values of a load level are displayed
averaged according to the time interval defined in the
Interval line at the end of the level.