Instructions for Use
CPET
page 48
Version: 4 | Release date: 01 April 2022
3.1.4.2.3
Correct Tidal Loops
By selecting the visible loop, the loop is displayed in the
graphics area.
By selecting the loop to be edited, the result is displayed in
the graphics area and can be changed manually by clicking
on the element with the mouse.
1.
Move the mouse
pointer to a line
that you want to
correct.
The cursor
changes to a
hand.
2.
Press the left
mouse button
and keep it
pressed. Move
the line with the
mouse to the
desired position
and release the
mouse button.
All measured
values are
recalculated.