Introduction
1-1
AccuPlot
AccuPlot AP
AP-100 and AP
-100 and AP-300 Series Plotters
-300 Series Plotters
AccuPlot plotters are designed to plot markers and pieces, either full-size or in
miniature. Working with your marking and grading system, these plotters draw
individual pieces or markers on paper for verification of piece accuracy, or for
later use in cutting fabric.
The models that make up the series are the AP-100, the AP-110, the AP-300,
the AP-310/320 and the AP-350/360. The AP-100 and AP-300 use a different
paper transport method and a smaller diameter paper roll than the other
plotter models.
The only difference between the AP-320 and AP-360 models is the maximum
paper width that can be used:
•
AP-310/320 2000 millimeters (78.7 inches)
•
AP-350/360
2400 millimeters (94.5 inches)
AccuJet AJ
AccuJet AJ-520 Plotter
-520 Plotter
The GGT AccuJet 520 plotter combines the speed and quality of pen plotting
of pattern outlines with the throughput and efficiency of inkjet printing for
annotation.
Annotation is printed at speeds up to 635 mm per second (25 ips) and can be
placed at any angle.
The AccuJet 520 plotter works with your marking and grading system.
Introduction
Introduction
11
