German pool DHM-706S, User Manual

P.14

P.15

Operation Instructions

Step 1

Pull out the rubber plug located on 
the back of the product.

Step 2

Connect a drain pipe of appropriate 
length to the drainage outlet.

Step 3

Prior to usage, check carefully 
and ensure the pipe is connected 
securely to avoid water leakage.

Continuous Drainage

To avoid frequent emptying of the water tank, user may attach a drain pipe of 10mm 

inner diameter to the back of the product (pipe not included).

Cleaning & Maintenance

Cleaning the Filter

Filter of the product is detachable for cleaning. Remove the filter, rinse it with clean 

water. Reinstall filter after it has completely air-dried. It is recommended to clean the 

filter once every two weeks.

• 

If the filter is only slightly dirty, simply remove the dust with a vacuum cleaner.

• 

If the filter is filthy, wash it with clean water. Do not use water exceeding 40°C.

Note:

To avoid deformation of the filter, let it air-dry after cleaning. Do not use any dry

-

ers. Do not use any chemical solutions such as alcohol, gasoline and benzene to 
clean it.

Cleaning the Main Body

•  Wash the water tank with a soft wet cloth to prevent the interior from getting mildew.

•  If the body o

r water tank is very filthy, clean it with soft cloth moistened with 

diluted neutral detergent. Do not use any chemical solutions such as alcohol, 
gasoline and benzene to clean the body.

WARNING! 

Prior to maintenance or repair, unplug the product to avoid electric shock. 

Maintenance

•  If the product will not to be used for a prolonged period of time, unplug the power source. 
•  Clean the product and let it completely air dry. After product and water tank are 

completely dry, put the power cord back into the water tank. Then cover the 
product with plastic bag or dust bag to prevent dust from entering.