P.7
P.6
Operating Instruction
Safety Notice
•
Please check if the input voltage is consistent with the charger or not. (DC 5V/1A).
•
Never immerse any components in water to avoid electric shock.
•
No objects shall block the wind inlet/outlet.
•
Please do not operate the fan in a fixed position or angle to the elder people, babies or anyone
with mobility problems for long time.
•
Do not use the fan in wet or damp locations such as bathrooms.
•
Please keep the fan away from soft objects like window or door curtains to avoid getting caught by
the fan.
•
If the power cord or the product is found damaged or hazardous, stop using it. Contact the
Customer Service and Repair center for inspection and maintenance. Do not try to repair it
yourself.
•
Please remove the power plug before cleaning, repairing or moving.
•
When the fan is not in use for a long time, please pull out the plug to avoid shortening the lifespan
of the product or causing accidents or hazards due to a long-term standby status.
•
Please keep the product out of children’s reach.
•
The product should be kept clean and regularly maintained.
•
Do not allow people with physical disability, mental disability or lack of experience or knowledge of
the product (including children) to use the product alone. If necessary, use the product under the
supervision of responsible adults.
•
Do not disassemble the product to avoid damage and electric shock.
•
Do not put fingers or other body parts or any objects into the wind inlet/outlet to avoid damage to
the product.
•
Do not put wet towel or cloth on the product to avoid electricity leakage or electric shock.
•
Please disconnect the plug during cleaning to avoid electric shock.
•
Make sure the fan is disconnected from the power supply before removing the fan guard. To avoid
accidentally touching buttons, stick an anti-touch sticker on them before storage.
Control Panel
“Fan speed” “Oscillation” button:
Press the two buttons
+
together for 2 seconds to activate/ unlocking child lock. (Pic 1 )
“Fan speed” button:
Press “Fan speed” button
once for (Indicator Light “I” ON) low wind speed; twice for (“II”) medium
wind speed; three times for (“III”) high wind speed; four times for (“IV”) the highest wind speed; and
five times to turn off. Corresponding indicator light will flash.
Press “Fan speed” button for 2 seconds to
turn off the appliance. (Pic 2 )
“Oscillation” button:
Press “Oscillation” button
to turn on or off the oscillation feature and a long press to switch on or
off the LED light. Press “Oscillation” button for 2 seconds to turn on/ turn off the LED light.(Pic 3 )
Flashing red indicator light during operation indicates the fan is running out of power. The fan will only
operate at speeds “I” or “II” in the course of charging. All functions resume at service with recharging
up to 80%.
Pic 1
Pic 2
Pic 3
“Fan speed” button
“Oscillation” button
