background image

P.14

P.15

Safety Precautions

• 

For safety reasons, carefully read the user manual before using the product. 

• 

This product is intended for household use only. Follow the instructions in this manual to set up and 
operate the product properly.

Warning! To reduce the risk of fire, electric shock or injuries, follow the basic instructions below, before 

using the vacuum cleaner.

 

• 

Never use the device if the cord is damaged or worn. If the machine stops functioning, or is dropped, 
damaged, placed outdoors or immersed in water, take it to the nearest authorized service center for 
examination and repair.

• 

Unplug the appliance before cleaning. Use dry towel to rub softly, never use water and volatile liquid for 
cleaning, such as alcohol and ethers.

• 

The appliance is designed for disinfecting and removing dust on various cotton products, such as bed 
linens, comforters, sofas and carpets.

• 

The appliance is intended for household use only, never use it for commercial or industrial purposes. Do 
not use the appliance for other than intended use.

• 

Disabled and handicapped personnel, inexperienced users and children are advised not to use the 
appliance.

• 

Never insert multiple plugs into a single socket.

• 

Turn off the appliance before unplugging it. Hold the plug instead of the cord.

• 

Never touch the plug or hold the device with wet hands.

• 

Thoroughly dry the dust filter after cleaning. A wet filter may damage the cleaner.

• 

Do not vacuum flammable materials or use it in hazardous area.

• 

Do not vacuum heated dust, ashes or sharp objects. 

• 

Do not suck in water or other liquids.

• 

Keep the appliance away from heat source, such as a heat sink and fire. Do not store it under direct 

sunlight.

• 

After using the UV sterilisation function, give sufficient time for the UV tube to cool down. To prevent 

scald, do not touch the tube before they are cooled down. 

• 

Do not operate the machine on surfaces where the material and colour can easily fall off.    

Attention

• 

Choose the correct AC socket outlet.

• 

The appliance should not be operated outdoors or on wet surface, it is intended for household use only.

• 

Do not place any objects on the suction nozzle. Do not use the device when the suction nozzle is 

blocked by dust, threads, hair or any objects that will impede aeration. Keep hair, loose clothing, fingers 

and other parts of the body away from the suction nozzle and movable parts.

• 

Switch off the machine before relocating it to somewhere else.

• 

Unplug the appliance before repair or when it is not in use. Do not pull the cable to unplug the device. 

• 

Properly install the dust container and filter. Otherwise, it may damage or hamper the effectiveness of 
vacuuming. Ensure that the dust filter is thoroughly dried before re-inserting into the machine.

• 

If there is any foul smell, abnormal noise or fumes, immediately stop using the appliance and contact 
authorized service center for examination and repair.

• 

Do not store or use the device near heat source, volatile or inflammable materials, such as a heater or 

aerosol spray.

Safety Instructions

UV Sterilisation Tube, PTC Heater Temperature Sensor and Micro Switch

For safety reasons, the appliance has 2 photo sensors to ensure that sterilisation tubes and PTC heater will 
automatically switch off when the distance between the device and the target surface exceeds 80mm. 
The appliance also has a micro switch to ensure that the UV Sterilisation Tube automatically switches off 

when the distance between the device and the target surface is 5-10mm.

The sterilisation tube and PTC heater will be switched on again when the appliance is placed on the target 
surface.

Attention: The photo sensors will not respond to black surface.

Safety Precautions

Summary of Contents for MKC-112














Reviews: