background image

Product Structure

P.5

Notice Before Use

Important

For safety purpose, you should read the instructions 

carefully before using the appliance for the first time. Save the 

instructions for future reference.
The appliance is designed for domestic use and may only be installed and operated in accordance with this 

instruction manual.
Do not run the appliance without loading. It is strictly forbidden to operate this appliance without the presence of 

any liquids, solids or semi-solids inside the blending jar.

P.4

1. Before plugging in the appliance, check that the electrical rating shown on the rating plate corresponds with your 

house electricity supply.

2. Never immerse the unit base (including the base of the blending jar) of the appliance in water or other liquid, nor rinse it 

under the tap to avoid risk of short circuit or electric shock. If there is water inside the unit base, please contact German 

Pool or a licensed technician for repair. 

3. Under no circumstances should the blending jar be immersed in any liquids. Do not spray or splash any liquids at the 

blending jar base. Do not directly rinse the blending jar base under the tap. The blending jar is not suitable for the 

dishwasher. If the blending jar base is sprayed or splashed wet, dry immediately. 

4. Never put the power cord or plug into water for cleaning.  Do not wipe the plug prongs with damp cloth, nor plug in with 

wet hands.

5. Plug the appliance to the wall outlet properly & securely. Loose plug may lead to overheat or electric shock.

6. If the power cord is damaged, it must be replaced by the manufacturer or its service agents or qualified electricians 

in order to avoid a hazard.

7. Never leave the appliance unattended.
8. Keep hands and utensils out of the container while the motor is running to prevent the possibility of severe personal 

injury and/or damage.

9. Do not run the appliance without loading in the blender jar.
10. To prevent spillage, do not put liquid in the blender jar exceeding the MAX line.
11.  Do not expose the appliance to source of heat such as a radiator or sun shining through a window. For good ventilation, 

do not place cloth underneath the appliance.

12.  The appliance is for indoor use only.
13. 

 

Always operate with the lid in place.  When processing hot beverages, properly secure the lid and measuring cup in 

place to avoid scalding due to spraying of hot liquids.

14. The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental 

capabilities, or any individual lack of experience and knowledge, unless they have been given supervision or 

instruction by a person responsible for their safety.

15.  Children should be supervised to ensure that they do not play with the appliance. 
16. Switch off the appliance and disconnect from supply before changing accessories or touching any rotating parts. Also, 

unplug the power cord from the wall outlet when appliance is not in use, before putting on or taking off parts, and 

before cleaning.

17. 

 

If the motor has overheated, the temperature monitoring system will be triggered and the motor will stop. Switch 

off the appliance and let the motor cool down. The motor temperature monitoring system will reset after the food 

processor is unplugged from wall socket for 45 minutes. 

18. 

 

The blade is very sharp, use with caution when handling the blade, emptying the jar and during cleaning. Do not 

attempt to disassemble the blade assembly and touch any rotating parts.

19. 

 

Any servicing should be performed by an authorized service representative. Do not attempt to disassemble, repair or 

modify the appliance.

Unit Body

Measuring Cup

Lid

Seal Ring

Blender Jar

Blade Assembly

Stainless Steel Base

Blade Mount

Drive Coupling

Cushion Base

Safety Lock

Unit Base

On/Off Button

Control Panel

Anti-Skid Rubber

Summary of Contents for PRO-11












Reviews: