German pool PRO-9S, User Manual

Operating Instructions

P.7

Time Setting

&

- Set time under “stand-by” mode.

- When the preset time is less than 1 minute, pressing time setting buttons will increase or decrease 5 seconds.

- When the preset time exceeds 1 minute, pressing time setting buttons will increase or decrease 10 seconds.

- Press and hold the time setting buttons to fast forward the time setting.

- The longest time setting is 30:00 (minutes). If it is set to 00:00, the blender has no action.

-  To continuously run the food processor, press “                   ” to adjust the time setting to “88:88” under 

 “stand-by” mode. Then, set your desired speed and press the “On / Off       ” button. Press the “On / Off       ” 

button again to stop. 

Note: Do not operate continuously for more than 10 min each time.

Speed Setting

&

Under “stand-by” mode, speed 1 (the lowest speed) to speed H (the highest speed) can be set by pressing the speed 

setting buttons (“                         ” & “                        ”). The display shows speed 1, 2, 3, 4, 5, 6, 7, 8, 9, H. The speed  

can be modifi d anytime during operation.

Pulse (Momentary Blending)

Under “stand-by” mode, hold down the “Pulse        ” button to run in Speed H. It will stop as soon as the 

button is released. 

Attention

- Check and make sure the electrical rating shown on the rating label corresponds with the power supply in 

your house. Insert the plug into the socket, all icons and digits will light up. After 1 second, the unit will turn to 

“energy-saving” mode: only “On / Off        ” button will light up; the other buttons and the LCD display are off.

- If the food processor is left idle for 3 minutes, it will automatically turn to “energy-saving” mode.

To resume operation, press the “On / Off       ” button fi st to enter stand-by mode.

- After any program finish s, the blender resumes to stand-by mode.

On/Off Button

- When the power is plugged, the unit will enter “energy-saving mode”. Press this button to enter “stand-by” mode 

(all buttons will light up). 

- Once time and speed settings are set or a preset program is selected, press this button to start the operation.

Press again to stop. 

Product Structure

P.6

SPEED  

Speed

Time

Bisque

Nuts

浆

Vegetable

Soy Milk

浆

Smoothie

LCD Display

Pulse Button

Speed Setting Buttons

Time Setting Buttons

On/Off Button

Control Panel

Preset Program Buttons

Speed Indicator

Time Indicator

Sauce