12
OPERATION
WARNING
Ensure that there is sufficient distance from the wall, fixtures or other
appliances. The distance must be at least 1.5 m from the front and sides
wall of the appliance to exclude the risk of fire.
1.
Take the appliance and all the accessory parts out of the
packaging.
2.
Check that the appliance shows no signs of damage.
3.
Select a location that is firm, level and incombustible.
4.
Insert the mains plug into a suitable wall socket with
220 – 240 V~50/60Hz and be sure power switch is on
“OFF” position.
OPERATION INSTRUCTIONS
1.
Remove heater product and parts from the packaging, place on
firm level ground or benchtop.
2.
Before inserting the power plug into an electrical outlet,
make sure that the electrical supply in your area matches that
on the rating label on the unit.
3.
Set the Power switch on side of product to “off”.
Plug the cord set into a 220-240v~AC electrical outlet.
4.
Turn the heater ON by flicking the POWER switch on
side of the heater.
The unit will display the current Room temperature.
5.
Then by pressing the “ ” (power) button to start the unit.
CAUTION
• Do not cover any of the vents as this will overheat the product or
may cause a fire if placing fabric or other easily ignitable materials.
• Do not attempt to stick anything inside through the vents as this
may cause electric shock or damage the components inside the heater.
• DO NOT touch the surface, it will be extremely hot during use and after.
