background image

4

Read this manual thoroughly before you start using the heater.
Store this manual, the completed warranty card, your receipt and the product packaging.
The safety precautions instructions reduces the risk of fire, electric shock and injury when 
correctly complied to.
Please follow all instructions and take notice of all warnings.

Please follow instruction when installing this product

 in accordance with the instruction  

manual. This product must be positioned in a sufficiently stable location, it can be potentially  
hazardous due to falling when mounted and can cause injury, particularly to children if it  
positioned incorrectly.
• Before installing this product, make sure your outlet voltage corresponds to the voltage  
  stated on the product rating label
• Do not use a damaged power cord, plug or loose outlet. Doing so may cause an  
  electric shock.
• If the power cord is damaged, it must be replaced by the manufacturer or a qualified  
  service technician.
• Do not plug several devices into the same outlet. Doing so may cause the outlet to  
  overheat and start a fire. Make sure the outlet is readily accessible during operation  
  of the equipment.
• Do not bend, twist or kink the power cord excessively. 
• Do not allow anything to rest on or roll over the power cord.  
  Doing so may cause a fire or an electric shock. 
• Do not run the power cord near heat-producing appliances such as radiators, stoves or  
  irons. The excessive heat could melt the insulation and expose live wires, resulting in  
  fire or electric shock.
• Do not expose this product to water. The electrical insulation could be damaged  
  and cause electrocution. Do not touch the unit when barefoot or parts of your body are  
  wet or damp.
• This appliance is not intended for use by persons (including children) with reduced 
  physical, sensory or mental capabilities, or lack of experience and knowledge, unless they 
  have been given supervision or instruction concerning use of the appliance by a person 
  responsible for their safety. 
  Children should be supervised to ensure that they do not play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
  or similarly qualified persons in order to avoid a hazard.
• This appliance is intended for heating indoor domestic environments. It is not 
  suitable for commercial, industrial or trade use. Do not use it for any other purpose (such 
  as drying clothes, etc.), and only use it as described in this manual. 

GENERAL SAFETY

Summary of Contents for GECH2300W

















Reviews: