DAN0805
14
• Always use the dust extraction system or dust bag when sanding wood.
WARNING
Switch off the tool immediately and unplug the power cord if any of the following problems occur during
normal use. Contact an authorized service center for inspection and repair if:
-
Moving parts jam or the tool speed drops abnormally.
-
The tool vibrates abnormally and sounds abnormal.
-
The motor housing becomes abnormally hot.
-
Sparks are emitted from the motor.
TECHNICAL DATA
Product code
DAN0805 (AJ46)
Rated Voltage
230V~ 50Hz
Output
450W
Protection class
II
IP-class
IP20
Speed (no-load)
6,000 – 12,000 rpm
Sandpaper
Ø 125 mm
Always wear ear protection!
WARNING
The actual vibration level when using a power tool can deviate from the specified maximum value, depending
on how the tool is used. It is therefore necessary to determine which safety precautions are necessary to
protect the user, based on an estimate of exposure in actual operating conditions (taking into account all
stages of the work cycle, e.g. the time when the tool is switched off and when it is idling, in addition to the
start-up time).
DESCRIPTION
1. Speed control
2. Power switch ON/OFF
3. Dust collector
Summary of Contents for DAN0805
Page 17: ...DAN0805 17...
