Message List
103
2
Established SPX Connection with PServer,
(RPSocket=<socketnumber>, connID=<con-
nection ID>)
(In the remote printer mode) Connection to the
print server has been established.
exiting
The lpd service has ended and the system is
exiting the process.
Exit pserver
(In the print server mode) The print server
function is disabled because the necessary
print server settings have not been made.
Frametype =<frame typename>
The frame type name is configured to be used
on NetWare.
httpd start.
The httpd service has started.
inetd start.
The inetd service has started.
< Interface >: Subnet overlap.
The same IP address and the subnet mask is
used with other device.
IPP cancel-job: permission denied.
The printer could not authenticate the name of
the user attempting to cancel a job.
IPP job canceled. jobid=%d.
The spooled job was canceled due to error or
user request.
LeaseTime=<lease time>(sec), Renew-
Time=<renewtime>(sec).
The resource lease time received from the
DHCP server is displayed in [lease time] in
seconds. The renewal time is displayed in [re-
new time] in seconds.
Login to fileserver <file server name>
(<IPX|IP>,<NDS|BINDERY>)
(In the print server mode) Login to the file
server is in the NDS or BINDERY mode.
Memory allocate error.
Data cannot be obtained.
Disconnect the USB cable, and then connect it.
Name registration success. WINS Serv-
er=<WINS server address> NetBIOS
Name=<NetBIOS name>
Name registration of <NetBIOS Name> to
<WINS server address> was successful.
Name registration success in Broadcast
name=<NetBIOS Name>
Name registration by Broadcast name of <Net-
BIOS Name> was successful.
Name registration failed. name=<NetBIOS
name>
Name registration of <NetBIOS Name> failed.
Change to different NetBIOS name.
nbtd start.
The nbtd service has started.
nprinter start (Netware)
(In the remote printer mode) The NetWare
service has started.
nwstart start. (NetWare)
The service for NetWare protocol stack setting
has started.
Open log file <file name>
(In the print server mode) The specified log file
has been opened.
papd start. (AppleTalk)
The AppleTalk print service has started.
Message
Problem and solutions
