Using a Printer Server
22
1
❖
Printers listed by SmartDeviceMonitor for Admin
SmartDeviceMonitor for Admin lists printers connected to the network. If
you cannot identify the machine you want to configure, print configuration
page, and then check the machine name.
Setting Up as a Print Server (NetWare 3.x)
Follow the procedure below to connect the machine as a print server using Net-
Ware 3.x.
A
Log on to the file server as a supervisor or supervisor equivalent.
B
Start NIB Setup Tool from the
[
Start
]
menu.
C
Click
[
Wizard
]
, and then click
[
OK
]
.
D
Select the printer you want to configure, and then click
[
Finish
]
.
A dialog box prompting you to perform the remaining configuration tasks in
the Web browser appears. Click
[
OK
]
, and then wait until Web Image Monitor
starts automatically.
E
A dialog box for entering the
[
User Name
]
and
[
Password
]
appears.
Enter the user name and password, and then click
[
OK
]
.
For details about the login user name and password, consult your network
administrator.
F
Click
[
Configuration
]
in the left area, click
[
Network
]
, and then click
[
NetWare
]
.
• Print Server Name: Enter the NetWare print server name. To use the inter-
face board as a print server, enter the name of a print server that is not ac-
tive on the file server. Use up to 47 characters.
• Logon Mode: Specify whether to designate a file server or NDS tree when
logging on to NetWare.
• File Server Name: When a file server name is entered here, only the speci-
fied file server is searched for. This item is mandatory. Use up to 47 char-
acters.
• NDS Tree: To enable NDS mode, enter the name of the NDS tree you want
to log on to. Use up to 32 alphanumeric characters.
• NDS Context Name: To enable NDS mode, enter the print server context.
Use up to 127 characters.
• Operation Mode: Specify whether to use the interface board as a print serv-
er or a remote printer.
• Remote Printer No.: This item is effective when the interface board is spec-
ified as a remote printer. Enter the same number as the number of the
printer to be created on the print server (0 to 254 characters).
