Copying
26
2
Copying from the Bypass Tray
Use the bypass tray to copy onto OHP transparencies, adhesive labels, translu-
cent paper, postcards and copy paper that cannot be loaded in the paper trays.
Important
❒
When copying from the bypass tray, select
[
1 Sided
]
for copying in
[
Dup./Com-
bine/Series
]
(for example
[
1 Sided
]
→
[
1 Sided
]
or
[
2 Sided
]
→
[
1 Sided
]
).
❒
Paper has a vertical length of 100-297 mm (3.9"-11.6") and a horizontal length
of 148-600 mm (5.8"-23.4") can be copied from the bypass tray.
❒
The machine can automatically detect the following sizes as standard size
copy paper:
• Metric version: A3
L
, A4
K
, A4
L
, A5
K
, A5
L
, 8
1
/
2
"
×
13"
L
• Inch version: A3
L
, 11"
×
17"
L
, 8
1
/
2
"
×
11"
K
, 8
1
/
2
"
×
11"
L
, 5
1
/
2
"
×
8
1
/
2
"
L
❒
If you want to use the size of paper other than the above, be sure to specify
the size.
❒
When copying on OHP transparencies or paper heavier than 128 g/m
2
(about 34 lb.),
you need to specify the type and size of paper in “Special Paper”.
❒
The maximum number of sheets you can load into the bypass tray depends
on paper type. The number should not exceed the upper limit.
❒
Paper larger than 433 mm (17.0") in length is likely to jam, crease, or not feed
in properly.
