Copier Functions
49
2
Sample copy
You can use this function to check the copy settings before making a long copy run.
Important
❒
This function can be used only when the Sort function is turned on.
A
Select Sort and any other necessary functions, and the place the originals.
B
Press the
{
Sample Copy
}
key.
One copy set is delivered as a sample.
C
If the sample is acceptable, press
[
]
.
The number of copies made is smaller than the specified number by one.
Note
❒
If you press
[
Suspend
]
after checking the results, you can return to step
A
.
You can change the settings for Staple, Duplex (one-sided
→
one-sided,
one-sided
→
two-sided), Copy Orientation, Margin Adjust., and Cov-
er/Slip Sheet. However, depending on the combination of functions, you
may not be able to change certain settings.
ART013S
