Monitoring and Configuring the Printer
88
4
dns
Use the “dns” command to configure
or display DNS (Domain Name Sys-
tem) settings.
❖
❖
❖
❖
View settings
The following command displays
current DNS settings:
msh> dns
❖
❖
❖
❖
DNS server configuration
The following command enables
or disables the DNS server ad-
dress:
msh> dns “number” server
“server address”
The following command displays
a configuration using the IP ad-
dress 192.168.15.16 on a DNS 1
server:
msh> dns 1 server 192.168.
15.16
• You can register up to three
DNS server numbers.
• You cannot use “255.255.255.255”
as the DNS server address.
❖
❖
❖
❖
Dynamic DNS function setting
msh> dns “interface_name”
ddns {on|off}
• You can set the dynamic DNS
function "active" or "inactive".
• {on} means "active" and {off}
means "inactive".
• ip1394 can be specified only
when the IEEE 1394 interface is
installed.
• wlan can be specified only
when the IEEE 802.11b interface
is installed.
❖
❖
❖
❖
Specifying the record overlap operation
m s h > d n s o v e r l a p { u p -
date|add}
• You can specify operations per-
formed when records overlap.
• update
To delete old records and regis-
ter new records.
• add
To add new records and store
the old records.
• When CNAME overlaps, it is al-
ways changed, irrespective of
settings.
❖
❖
❖
❖
CNAME registration
msh> dns cname {on|off}
• You can specify whether to reg-
ister CNAME.
• {on} means "active" and {off}
means "inactive".
• The CNAME registered is the de-
fault name beginning with rnp.
CNAME cannot be changed.
❖
❖
❖
❖
A records registration
msh> dns arecord {dhcp|own}
• {dhcp}
You can specify the method of
registering an A record when
the dynamic DNS function is
enabled and DHCP is used.
• {own}
To register an A record using
the printer as the DNS client.
The DNS server address and the
domain name already designat-
ed are used for the registration.
❖
❖
❖
❖
Record updating interval settings
msh> dns interval “time”
• You can specify the interval after
which records are updated when
using the dynamic DNS function.
• The updating interval is speci-
fied hourly. It can be entered be-
tween 1 and 255 hours.
• The default is 24 hours.
Interface name
Interface configured
ether
Ethernet interface
ip1394
IEEE 1394 interface
wlan
IEEE 802.11b interface
Summary of Contents for DSm651
Page 10: ...4...
Page 14: ...Getting Started 8 1...
Page 140: ...Special Operations under Windows 134 5...
Page 155: ...Copyright 2004...
