background image

10

6

Gestaltungsmerkmale von 

Warnhinweisen im Text 

GEFAHR 

Hinweise mit dem Wort GEFAHR warnen 
vor einer gefährlichen Situation, die zum 
Tod oder zu schweren Verletzungen führt. 

WARNUNG 

Hinweise mit dem Wort WARNUNG warnen 
vor einer gefährlichen Situation, die 
möglicherweise zum Tod oder zu schweren
Verletzungen führen kann. 

VORSICHT 

Hinweise mit dem Wort VORSICHT warnen 
vor einer Situation, die zu leichten oder 
mittleren Verletzungen führen kann. 

Gestaltungsmerkmale für 

Hinweise auf Sachschäden 

Achtung!

 

Diese Hinweise warnen vor einer Situation, 
die zu Sachschäden führt. 

Beschreibung 

Lieferumfang und 

Gerätebeschreibung 

Lieferumfang 

Die Komponenten des Geräts werden in eine

r

 

Ledertasche

 geliefert. Vor dem Einsatz müssen 

Sie die Komponenten verbinden und die Akkus 
aufladen. 

Folgende Bestandteile sind im 
Lieferumfang enthalten 

 

Anzeigegerät

 

 

Akku (im Anzeigegerät fest installiert)

 

 

Schallaufnehmer inklusive Kabel

 

 

Ledertasche

 

 

Ladegerät inklusive Kabel

 

Bedienungsanleitung

 

6

Gestaltungsmerkmale von 

Warnhinweisen im Text 

GEFAHR 

Hinweise mit dem Wort GEFAHR warnen 
vor einer gefährlichen Situation, die zum 
Tod oder zu schweren Verletzungen führt. 

WARNUNG 

Hinweise mit dem Wort WARNUNG warnen 
vor einer gefährlichen Situation, die 
möglicherweise zum Tod oder zu schweren
Verletzungen führen kann. 

VORSICHT 

Hinweise mit dem Wort VORSICHT warnen 
vor einer Situation, die zu leichten oder 
mittleren Verletzungen führen kann. 

Gestaltungsmerkmale für 

Hinweise auf Sachschäden 

Achtung!

 

Diese Hinweise warnen vor einer Situation, 
die zu Sachschäden führt. 

Beschreibung 

Lieferumfang und 

Gerätebeschreibung 

Lieferumfang 

Die Komponenten des Geräts werden in eine

r

 

Ledertasche

 geliefert. Vor dem Einsatz müssen 

Sie die Komponenten verbinden und die Akkus 
aufladen. 

Folgende Bestandteile sind im 
Lieferumfang enthalten 

 

Anzeigegerät

 

 

Akku (im Anzeigegerät fest installiert)

 

 

Schallaufnehmer inklusive Kabel

 

 

Ledertasche

 

 

Ladegerät inklusive Kabel

 

Bedienungsanleitung

 

Installing and connecting the 

equipment
Preparing for installation

DANGER

Risk of crushing from falling equipment 

or components.

 Always use suitable lifting gear when 

lifting, moving and working on the 

equipment and its components.

 Make sure that the equipment cannot 

tip over.

➢  

Make sure that there are never any 

persons below suspended loads. 

 Remove the equipment from the transport 

packaging.

 Inspect the equipment for damage sustained 

during transport.

 If you find any such damage, please contact 

the manufacturer.

Connections may be sealed with plugs on de-

livery.

Connecting the equipment

DANGER

Incorrectly connected equipment can 

result in accidents with extremely severe 

injuries or death.

 Make sure that only specialist per-

sonnel connect the equipment to the 

pipe. 

 Remove the plugs before installation.

 Store the plugs and packaging for 

later use.

Transporting the equipment

DANGER

Risk of crushing from falling equipment 

or components.

 Always use suitable lifting gear when 

lifting, moving and working on the 

equipment and its components.

 Make sure that the equipment cannot 

tip over.

➢  

Make sure that there are never any 

persons below suspended loads.

  During transport, maintain the same condi-

tions as during storage.

 Insert the plugs into the connections before 

transport.

If you do not have the supplied plugs, 

seal the connections with comparable 

covers.

 Over distances of a few metres, you may 

transport the equipment unpackaged.

 Over longer distances, use the original pack-

aging for transport.

 If the original packaging is not available, pack 

the equipment so that it is protected against 

corrosion and mechanical damage.

The equipment can be transported for 

short periods at temperatures below 0 

°C, provided that it has been thoroughly 

drained and dried.

6

Gestaltungsmerkmale von 

Warnhinweisen im Text 

GEFAHR 

Hinweise mit dem Wort GEFAHR warnen 
vor einer gefährlichen Situation, die zum 
Tod oder zu schweren Verletzungen führt. 

WARNUNG 

Hinweise mit dem Wort WARNUNG warnen 
vor einer gefährlichen Situation, die 
möglicherweise zum Tod oder zu schweren
Verletzungen führen kann. 

VORSICHT 

Hinweise mit dem Wort VORSICHT warnen 
vor einer Situation, die zu leichten oder 
mittleren Verletzungen führen kann. 

Gestaltungsmerkmale für 

Hinweise auf Sachschäden 

Achtung!

 

Diese Hinweise warnen vor einer Situation, 
die zu Sachschäden führt. 

Beschreibung 

Lieferumfang und 

Gerätebeschreibung 

Lieferumfang 

Die Komponenten des Geräts werden in eine

r

 

Ledertasche

 geliefert. Vor dem Einsatz müssen 

Sie die Komponenten verbinden und die Akkus 
aufladen. 

Folgende Bestandteile sind im 
Lieferumfang enthalten 

 

Anzeigegerät

 

 

Akku (im Anzeigegerät fest installiert)

 

 

Schallaufnehmer inklusive Kabel

 

 

Ledertasche

 

 

Ladegerät inklusive Kabel

 

Bedienungsanleitung

 

Summary of Contents for FPS 11

















Reviews: