background image

 

 

 

   

Information on property damage 

or malfunctions 

 

The VZ 10 equipment may malfunction if ice 
forms in the cylinder. 

 

Only use the VZ 10 rail hook if the cylinder is 
functioning perfectly. 

 

Only use the VZ 10 rail hook with dry 
instrument air. 

  

Qualification of personnel 

Specialist personnel must be familiar with and have 
experience inn the following areas: 

 

Locally applicable explosion & fire protection 
and occupational health & safety provisions 

 

Working on pneumatic equipment (for work on 
the VZ 10 rail hook) 

 

Working with hazardous (hot or pressurised) 
fluids 

 

Lifting and transporting loads 

 

All information in this Installation & Operating 
Manual and other applicable documentation 

  

Protective gear 

The required protective clothing depends on the 
regulations at the place of work and the fluids in the 
tank car. Information on suitable protective clothing 
and PPE can be found in the safety data sheet of 
the fluid used. 

  

The protective clothing basically consists of the 
following items: 

 

Safety helmet 

 

Safety boots 

 

Sturdy leather gloves 

  

Typographic features of warning 

notes 

 

DANGER 

Notes with the heading DANGER warn 
against imminent dangerous situations that 
can lead to death or serious injuries. 

  

 

WARNING 

Notes with the heading WARNING warn 
against possibly dangerous situations that 
could lead to death or serious injuries. 

  

 

CAUTION 

Notes with the heading CAUTION warn 
against dangerous situations that could 
lead to minor or moderate injuries. 

  

Formatting features for warnings 

of property damage 

 

Attention! 

This information warns of a situation 
leading to property damage. 

  

Description 

Scope of supply 

Delivery includes the rail hook and this Installation & 
Operating Manual. 
The slack rope is not included in delivery. 

  

 

  

Summary of Contents for VZ 10

















Reviews: